 |
| Specifications |
FD-800 |
| Measurement method |
Detection of weight loss by heating & drying |
| Sample mass |
0.1-120g (optional weight sampling) |
| Measurement subject |
Moisture / Solid content / Weight |
| Measurement range |
0-100% (wet base, solids); 0-500% (dry base) |
Repeatability
(standard deviation) |
Sample with a weight of 5g or higher : 0.05%
Sample with a weight of 10g or higher : 0.02%) |
| Resolution |
Moisture percentage 0.01% / 0.1%; Weight 1 mg
Temperature setting range for thermistor (T1): 30 -
180°C (1°C interval); for radiation thermometer (T2) 30
- 250°C (1°C interval) |
| Measurement modes |
Automatic stop mode, Timer stop mode, Rapid drying
mode, Equilibrium drying mode, Step drying mode,
Predictive (comparative) measurement mode |
| External output |
RS-232C interface |
| Environmental conditions |
Temperature 5~40°C , Humidity : max of 85%RH
Pollution degree 2 , Altitude up to 2000m |
| Sample pan |
SUS (diameter 130 mm, depth 13 mm) |
| Heat source |
Mid-wave infrared quartz heater (200Wx2) |
| Power source |
AC100~120V / 220~240V (50/60Hz) |
| Power consumption |
Max 900W |
| Dimensions & weight |
220(W)x415(D)x190(H) , 4.5Kg , Shipment 10Kg |
| Accessories |
Spare sample pan, Aluminum sheets, etc. |
| Options |
Printer Set (VZ-330, Printer Cable: VZC-14) 10x Printer paper
rolls, 500x Aluminum sheets Radiation thermometer calibration
set GF-200 (digital thermometer, standard heating sample), FD-
800 Data logger software FDL-01 (RS-232C cable, USB-RS232C
conversion cable), Windshield with deodorizer case FW-100 |
