 |
 |
Wireless
Electromagnetic Coating Thickness Tester
LE-200W
|
|
|
 |
|
Our
wireless coating thickness testers employ a method where
the cable between the main unit and probe is done away
with and a signal is sent from the product to the main
unit without a direct, physical line. Because it's wireless,
there's no need to set-up a cable during measurement,
making this unit even safer to use. |
|
|
|
| |
|
 |
| Specifications |
LE-200W
|
|
| Measurement
Method |
Electromagnetic
induction |
|
| Applications
|
Non-magnetic
coating on iron and steel (ferrous) substrates |
|
| Measurement
Range |
0-1500µm
or 60.00mils |
|
| Measurement
Precision |
Under
15µm: ±0.3µm, 15µm or greater:
±2% |
|
| Resolution |
0.1µm
(less than 100µm), 1.0µm (100µm or
greater) |
|
| Statistical
Functions |
Number
of measurements, Average value, Standard deviation,
Maximum value, Minimum value, Block numbers |
|
| Probe
|
One-point
contact fixed pressure (LEP-20C) |
|
| Display
Format |
Digital
(LCD, smallest displayed unit 0.1µm) |
|
| Output
|
RS-232C
interface (transmission speed-2400bps) |
|
| Power
Source |
AC100V
(50/60Hz) or 1.5 ("AA" size Alkaline batteries)
x 6 (main unit), Printer ("AA" size Alkaline batteries)
x 4
Probe: DC6V (Cylinder battery 2CR 1/3) |
|
| Dimensions
& Weight |
Main
unit: 140(W)x 250(D)x 80(H)mm, 1.1kg
Probe: 26(W)x 38(D)x 134(H)mm, 0.08kg |
|
| Accessories
|
Calibration
plate, Iron substrate, Infinite adjustment dummy,
Batteries (1.5V, "AA" size Alkaline), Cylinder battery,
Probe adapter, AC adapter, Printer paper, Carrying
case |
|
| Options
|
Probe
connection cable, Computer connection cable, Data
Management Software - "McWave" and "MultiProp" |
|
| (McWave
and MultiProp are products of CEC Co.) |
|
|
|
|
