Metal Detector Inline Iron Detector DT-8

Metal Detector


Inline Iron Detector DT-8
  • Stationary iron piece detector for installing on the production line
  • Detects iron pieces mixed into products and raw materials with high sensitivity
  • Sensor effective width can be ordered in 100mm increments from 500mm to 4000mm
  • 1 to 4 channels can be ordered for sensing position division


Detection MethodMagnetic induction method
Detection ability (example: distance)Small iron piece (about the size of an insect pin): approx. 60mmLarge iron piece (bolt M7 x 50mm): Approx. 300mm
Alarm methodBuzzer, lamp (large red) are shared action for all channelsLamps (small red) are individual action for each channelTwo ways of continuous alarm and instant activation (selected with hold switch)
Number of channels1 to 4 *5 or more are optionally available
External controlContact circuit (non-voltage)MAKE or BREAK (selected with hold switch interlocked with alarm)
Power supply100 V AC (50/60 Hz) *(120V/200V/220V/240V) are optionally available
AccessoriesPower cable 2.5mSensor cable 5m (1 per channel)External control cable 1m (0.75mm3, 4 cores)Electronic buzzer (cable length 2.5m)Spare fuseOperating Manual
Dimensions / weight400 (W) x 280 (D) x 250 (H) mm / 10Kg (1 channel type)465 (W) x 305 (D) x 220 (H) mm / 15Kg (2/3/4 channels type)