| Measurement method | Detection of weight loss by heating & drying |
|---|---|
| Sample mass | 0.1-120g (optional weight sampling) |
| Measurement subject | Moisture / Solid content / Weight |
| Measurement range | 0-100% (wet basis, solids); 0-500% (dry basis) |
| Repeatability (standard deviation) | Sample with a weight of 5g or higher : 0.05%Sample with a weight of 10g or higher : 0.02%) |
| Resolution | Moisture percentage 0.01% / 0.1%; Weight 1 mg Temperature setting range for thermistor (T1): 30 - 180°C (1°C interval); for radiation thermometer (T2) 30 - 250°C (1°C interval) |
| Measurement modes | Automatic stop mode, Timer stop mode, Rapid drying mode, Equilibrium drying mode, Step drying mode, Predictive (comparative) measurement mode |
| External output | RS-232C interface |
| Environmental conditions | Temperature 5~40°C , Humidity : max of 85%RH Pollution degree 2 , Altitude up to 2000m |
| Sample dish | SUS (diameter 130 mm, depth 13 mm) |
| Heat source | Mid-wave infrared quartz heater (200Wx2) |
| Power source | AC100~120V / 220~240V (50/60Hz) |
| Power consumption | Max 900W |
| Dimensions & weight | 220(W)x415(D)x190(H), 4.5kg ,Shipment 310(W)x580(D)x400(H), 10kg |
| Accessories | Spare sample pan, Aluminum sheets, etc |
| Options | Printer Set (VZ-380, Printer Cable: VZC-69) 10x Printer paper rolls, 500x Aluminum sheets Radiation thermometer calibration kit GF-210 (digital thermometer, standard heating sample), Data logger software "FDL-02" (RS-232C cable, USB-RS232C conversion cable), Windshield with deodorizer case FW-100 |
