Appearance Analyzers Grain Appearance Analyzer RN-700E

Appearance Analyzers

Features

Grain Appearance Analyzer RN-700E
  • It can photograph a picture of the grain sample on the translucent tray with the use of reflected light and two pictures of it with the use of transmitted light, analyze each grain based on the obtained measurement data, and display the results.
  • It takes approximately 40 seconds to process 1000 grains of short rice sample and 50 seconds to process 500 grains of long rice sample (varies with grain types and species). The measurement results can be displayed in grain count (%) or mass conversion (%), and also can be recorded with the integrated printer.
  • This device analyzes images of stationary samples, so it has high repeatability, and because it has no moving parts, it is an ideal analytical device with few malfunctions.

Specifications

Measurement methodAnalysis by image processing
Image pickup deviceCMOS image sensor (5 million pixels)
Light sourceFor reflected image: RGB 3 colors LED
For transmitted image: 10.4-inch color LED
ApplicationShort Brown Rice, Short Milled Rice, Long Brown Rice, Long Milled Rice
Contents to be analyzedShort Brown Rice *1: Whole, Discolor, Dead, Cracked, Broken, Chalky, Damaged, Foreign Mattor
Short Milled Rice: Whole, Chalky, Broken, Damaged, Colored, Cracked, Small Broken, Foreign Mattor
Long Brown Rice *1: Head, Broken, Chip, Chalky, Damaged, Immature, Yellow, Red, Cracked, Others, Dead
Long Milled Rice *1: Head, Broken, Chip, Chalky, Damaged, Immature, Yellow, Red, Cracked, Undermilled, Dead
(* 1: The analyzed content differ from the displayed item depending on the setting.)
Grain count to be measuredShort rice: 800 to 1200 grains/ Long rice: 500 to 1000 grains
(The recommended grain count is depending on the shape of the rice grains. For a count of less than 200 or more than 2000, the value is displayed as a reference value.)
Measuring timeApprox. 40 sec./1000 grains (varies with grain types and species)
DisplayOrganic EL (128 × 64 dot)
nput/outputUSB2.0 (device 1ch), SD card slot, built-in printer
Temperature/ humidity for operating rangeTemperature 5 to 35 °C, humidity 10 to 80 % (no condensation)
Temperature/ humidity for storage rangeTemperature: ‒20 to 70 °C (main body, sample tray)
Temperature: ‒20 to 40 °C (printer paper)
Humidity: 10 to 80% (no condensation)
Power supply100 to 240 VAC (at using the AC adapter)
5 to 24 VDC (at using a mobile battery *2)
(*2: A commercially available mobile battery with output capacity of 50 W or more can be used. Plug: 5.5 mm in outer diameter, 2.1 mm in inner diameter, center positive.)
Dimensions and weight340 (W) × 360 (D) × 335 (H) mm, 7 kg (main unit only)
AccessoriesSample tray, standard plate tray, tray storage case, sample collection tube, cleaning nozzle, measuring spoon, brush, cover, AC adapter, Power cord, printer paper, Easy Measurement Guide/Maintenance Guide, Operating Manual
OptionsData Logger Software NDL-04E

Brochure,Manual

Manual（PDF）Download (3 MB)

Easy Guide（PDF）Download (3 MB)